Almost4x4

Hi Everybody!!!

Maybe most of us would have used it, but thought i would share for the benefit of others.

I have used the fevicol steel epoxy available for AED 5 in a number of applications.
[IMG]https://dl.dropbox.com/u/33932054/%24%2 ... ~60_35.JPG[/IMG]

I have used it to make a Flag pole mount, This is what i did..

[IMG]https://dl.dropbox.com/u/33932054/20130204_135925.jpg[/IMG]

I used a Air Hose coupler as a quick release....

[IMG]https://dl.dropbox.com/u/33932054/20130204_140006.jpg[/IMG]


[IMG]https://dl.dropbox.com/u/33932054/20130204_140014.jpg[/IMG]
I recently used it to make a camera mount where i needed to attach a rod to a suction cup.(Forgive the shabby job) But it creates a very strong hold, as good as welding.


[IMG]https://dl.dropbox.com/u/33932054/20130204_134418.jpg[/IMG]


The flag pole could be attached to the suction cup to create a quick release flag suction cup mount!!!

Hi, here's what I do on the Pajero.. a bit of hard work but works well.. open the cover of the spare wheel... (2 bolts from inside) there's just enough gap to put the pole, in my case the fishing rod, between the tyre and the frame of the spare tyre cover.. put the bolts back.. stays very firm.. unfortunately don't have a picture..

Vivan

dear u will get the thread rod clamp from any building material shop which can be fixed in the roof rails of ny car and connect the flag pole into the thread normally 10mm or 12 mm should work. ref see the pic [ATTACH=CONFIG]1257[/ATTACH][ATTACH=CONFIG]1258[/ATTACH][ATTACH=CONFIG]1259[/ATTACH]

Marshals and fellow almosters,
What do you use for a flagpole?
And where can I get my flag?

[quote=MaddieTJ;23965]Marshals and fellow almosters,
What do you use for a flagpole?
And where can I get my flag?[/quote]

Morning Maddie,

you can easily type what ever in the Search cell (at the right top of the page) and find a lot of topics about whatever you are asking for :032:, for your question you find these useful links;

http://www.almost4x4.com/vb/showthread. ... t=flagpole
http://www.almost4x4.com/vb/showthread. ... t=flagpole

hope this helps