Almost4x4

Hi Almosters,

After a Long Story, I end up with one single key for my TJ :055:

So is the only way to make a new one is just to give a visit to Jeep Dealer and pay a lot for it? or there is another way?

I already have a new Jeep blank key, but if I did cut/shape it I can't do the immobilizer programming as its required two keys to be done..


Any escape way for this...

Thanks
Zak

some key shops offer this service but charge close to AED500 for it.. you need to search

Hi,

Every car key is pre-programmed and a blank key can be used only to unlock the car, other wise it wouldn't serve the actual purpose.

Only way is to get a new key done from an authorised Jeep dealers and they charge you AED 370 per key.

Regards,

Thanks guys,

I have no other way, but wish the dealer gonna charge only 370 aed for a key :)

Hey,

I've done a key cutting & Programming in SHJ, and it works great for DHS 200 (JEEP JK)

The shop name is Al-Jarah, BMW Road, Sharjah Industrial Area.

06-533-4329
050-795-5517
050-549-1985

Good luck...

Not sure if it will work for you but when I was in Iraq working on suburbans - I would get two new basic spare keys cut and duck tape the original key inside the steering column.

Thanks Mukhallalati, finally I went to al-jarah last saturday, made a new key for 200 aed (key+cutting+programming) as well i already bought a stylish Jeep blank key from Quadratec so he did cutting and programing only for 100 aed ;)

Thanks alot